4-Part Blend Mix-Dispensers

Triplematic’s Series 1250 is specially designed for the flexibility of mixing. There are two 4-part blend mix-dispensers available, the Series 1250 Blend and the Series 1250 Select. 

The Series 1250 Blend Dispenser contains 2 part "A" materials (high and low viscosity), which are gravity fed into a patent-pending pressure pump, then to a metering valve and to the "A" material gear pump. Both "A" and "B" materials are metered with gear pumps for high accuracy and repeatability giving the best long-term results. Part "A" material pump will meter viscosity from 1200 to 100,000 CPS and part "B" pump from 20 to 1200 CPS. 

This dispenser is set up with three fixed ratio settings from 100-8 parts to 100-18 parts. With a flip of the switch, the Series 1250 can be used as a shot delivery or continuous flow machine. The blending of part "A" material is done by turning of a blending valve. Changing volume is done with a volume digit indicator by changing the RPM with an SCR control knob and reading the LED display number with reference to an off/on shot timer. The transfer pump system is standard on this model only. 

The Series 1250 Select has the same technology as the Series 1250 Blend except there can be up to 4 part "A" reservoirs. Changing from one tank to the other is done in one second with a select switch. 

Both custom-designed industrial meter-mix dispensers use heat on part "A" material of 15,000 CPS and higher to keep material at 78 degrees Fahrenheit. The agitation is added to keep fillers in suspension, and the pot lifeguard timer and fixed motionless mixer have a positive cut-off. 

While significantly reducing labor and material costs, the Series 1250 dispensers from Triplematic, with a floating head, eliminate weighing and mixing errors, reduce operator exposure to toxic materials, and produce a superior and uniform product.